Series representative image — not a model-specific photograph.
Panasonic / MODEL
EX-19EA-PN
EX-10 Ultra-slim Photoelectric Sensors Ver.2Panasonic EX-19EA-PN — Detection Mode: Through-beam; Sensing Range: 1 m; Output Type: PNP open-collector transistor.
- Detection Mode
- Through-beam
- Sensing Range
- 1 m
- Output Type
- PNP open-collector transistor
- Output Operation
- Light-ON
Overview
For industrial indoor use. Never use as a sensing device for personnel protection; do not use as a safety door switch. Consult the supplied catalogue and applicable operating instructions (pp.4,11). Through-beam set. P/D markings identify emitter/receiver labels; the catalogue does not list them as independent ordering codes, so separate component models are not generated.
Specifications
| Detection Mode | Through-beam |
|---|---|
| Sensing Range | 1 mBetween the matched emitter and receiver. Full beam interruption is required. |
| Output Type | PNP open-collector transistorPNP variants are explicitly listed in the PNP column of the p.5 ordering table. Switch-on-bifurcation models are NPN only. |
| Output Operation | Light-ON |
| Beam / Product Type | Standard through-beam |
| Sensing Direction | Side sensing |
| Cable Variant | Standard 2 m cable |
| Supply Voltage | 12 to 24 V DC ±10%Ripple P-P: 10% or less. Default unspecified measurement conditions: ambient +23 °C. |
| Response Time | ≤ 0.5 ms |
| Current Consumption | Emitter: ≤ 10 mA; receiver: ≤ 10 mAThrough-beam values apply to each component separately; they are not a per-set total. |
| Maximum Output Current | 50 mA source |
| Maximum Applied Output Voltage | 30 V DCBetween output and +V for PNP; between output and 0 V for NPN. Use the applicable p.9 circuit diagram. |
| Residual Output Voltage | ≤ 2 V at 50 mA source; ≤ 1 V at 16 mA source |
| Short-circuit Protection | Incorporated |
| Utilization Category | DC-12 or DC-13 |
| Repeatability (Perpendicular to Sensing Axis) | ≤ 0.05 mm |
| Minimum Sensing Object | Diameter 2 mm opaque objectFull beam interruption, emitter/receiver spacing: 1 m. |
| Operation Indicator | Orange LED; lights when output is ON |
| Stability Indicator | Green LED; stable light received or stable dark condition |
| Protection | IP67 (IEC)Water splashes during sensing may be detected as an object (p.4). |
| Pollution Degree | 3 (Industrial environment) |
| Ambient Operating Temperature | -25 to +55 °CNo dew condensation or icing allowed. |
| Storage Temperature | -30 to +70 °C |
| Ambient / Storage Humidity | 35 to 85% RH |
| Ambient Illuminance | Incandescent light: ≤ 3,000 lx at light-receiving face |
| Voltage Withstandability | 1,000 V AC for 1 minuteBetween all connected supply terminals and enclosure. |
| Insulation Resistance | ≥ 20 MΩ with 250 V DC meggerBetween all connected supply terminals and enclosure. |
| Vibration Resistance | 10 to 500 Hz; 3 mm double amplitude; X, Y and Z directions, 2 hours each |
| Shock Resistance | 500 m/s² (approximately 50 G); X, Y and Z directions, 3 times each |
| Emitting Element | Red LED, peak wavelength 624 nm, modulatedWavelength is model-dependent; these are LED sensors, not laser sensors. |
| Material | Enclosure and lens: polyarylate |
| Cable Length | 2 m |
| Cable Construction | 0.1 mm², 3-core cabtyre cable (emitter: 2-core) |
| Maximum Total Cable Extension | 50 m with cable ≥ 0.3 mm²The manufacturer limits the stated safety applications to 30 m (p.7 note 6 / p.8 note 9). This does not authorize personnel-protection use; see p.11. |
| Weight | Net: approximately 20 g each emitter and receiver; gross: approximately 50 g |
| Supplied Accessories | Mounting screws: 1 setMounting bracket is not included. MS-EX10 brackets cannot be used with narrow-beam types (p.5). |
| Catalogue-listed Regulations / Recognition | CE Marking (EMC, RoHS); UKCA Marking (EMC, RoHS); ISO 13849-1 Category 1, PL c; UL Recognition certificationAs stated in PCE-GENEX10-2 (2024.11); current certificate status not independently checked. Category 1 PL c applies from December 2021 production, excludes EX-15/17 variants, and does not establish complete-machine compliance. |
| Initial Power-on Transient | 50 msDo not use during this interval after power-on. This is separate from the ≤ 0.5 ms response-time rating. |
Document
PDFpanasonic-ex10-ultra-slim-sensors-en.pdfPanasonic EX-10 Series Ver.2 - English Catalogue (PCE-GENEX10-2, 2024.11) · Shared series documentRequest this model
Send the exact ordering code, quantity or product list.